Great Floor 300

  • Dry Time (Initial cure @ 29 deg C): 3-6 hours
  • Full Cure/Maximum Strength: 168 hours
  • Pot life (@29 deg C): 1/2 to 1 hour, less at higher temperatures.

Best to use on

Technical Info

  • Dry Time (Initial cure @ 29 deg C): 3-6 hours
  • Full Cure/Maximum Strength: 168 hours
  • Pot life (@29 deg C): 1/2 to 1 hour, less at higher temperatures.

How to Use

  1. Do surface inspection before application.  Check floor design, integrity and contaminants.  Check moisture content too as this may be detrimental to coating adhesion.
  2. To prepare surface,  make sure it is dry, clean and free from oils, fats or greases.  
  3. If the surface to be coated is smooth, it should be abraded using medium to coarse sandpaper for better adhesion.
  4. Mixing ratio is 2 parts A to 1 part B
  5. Stir individual components then combine, adding part B to part A and mix thouroughly until uniformly blended to a workable consistency. 

Uses

Used for coating new or old uncoated or previously coated industrial concrete floors exposed to:

> heavy foot and rubber-tired vehicle traffic;

> Intermittent chemical spills, splaches and power washings.

Features

  • A two-component, heavy-duty, 100% solids epoxy floor coating for heavy-duty protection of industrial floors.
  • Has a gloss finish
  • With coverage of 2 square meters per liter
  • With very good wathering resistance
  • Available in red, yellow, light gray, dark gray, green , blue, white, and beige colors.  

Availability

Available in  cans of 4 Liter Set.

Data Sheets

Material Safety

Technical

Other related products

Right Adhesives for the
Right Materials

Did you know there are Pioneer adhesives and sealants made specifically for different types of materials?

Go to FIX-IT Center