Water-Tite 101

  • Estimated coverage of 1 to 1.3 kg per sq meter @ 2 coats (but actual coverage will depend upon the profile and porosity of the substrate)

Best to use on

Technical Info

  • Estimated coverage of 1 to 1.3 kg per sq meter @ 2 coats (but actual coverage will depend upon the profile and porosity of the substrate)

How to Use

  1. Water-Tite 101 can be applied on both new and old structures either on water retaining side or on the negative side.
  2. For surface preparation, make sure surface is free of laitance, dirt, paint coating and other foreign matter.
  3. Surface must be left damp for application of Water-Tite 101
  4. Mix 4.54 kg with 1.5 liters of clean water OR 25 kg bag with 8.25 liters of water.  Mix thoroughly with slow speed drill equipment until cramy consistency is achieved.
  5. Allow mix to rest for 15 minutes then apply

Uses

Water-Tite 101 provides a lasting imperviousness to water. It is used for both internal and external applications and has excellent adhesion to all cement-based substrated.

Recommended for use in the following applications:

  • water treatment or sewage structures
  • basement walls
  • irrigation tunnels
  • supporting walls/columns
  • tunnels, silos, water tanks
  • foundation slabs inside
  • underground garages 

Features

  • Water-Tite 101 is a crystalline capillary waterproofing formulation of selected blends 
  • Non-flammable

Availability

Available in 4.54 kg can and 25 kg bag

Data Sheets

Material Safety

Technical

Other related products

Right Adhesives for the
Right Materials

Did you know there are Pioneer adhesives and sealants made specifically for different types of materials?

Go to FIX-IT Center